The cost of human service in the foreign market is quite high, and this is no exception in the switch field. Therefore, eliminating the step of manual installation is a necessary condition for high-quality switches.
Next, we can analyze with the help of several toggle switches from YESWITCH Electronics to see which terminal installation is the most cost-effective and convenient.
The first one is the protruding base with screw terminals. For this switch, you need to first loosen the screw terminals, strip the wire ends, insert them into the terminal holes, tighten the screws to press the wires, and ensure a firm connection without loose wires. Make sure the screws are tightened firmly to prevent the wire ends from loosening, overheating, or sparking due to vibration.
The second one is the protruding base with soldering terminals. Before installation, you need to remove a small amount of insulation from the wire, expose the copper core, and pre-tin it; then place the tinned copper wire against the soldering terminals of the switch and heat the terminals with an electric soldering iron to melt the solder and make the copper wire and the terminals completely welded. The solder joints should be full, without false or incomplete soldering. After the welding is completed, you need to wrap the solder joints with heat shrink tubing or insulating tape to prevent short circuits and leakage.
The third one is the protruding base with quick-insert terminals. For this switch, you only need to use a wire pressing pliers to press the wire onto the standard 6.3mm plug terminals, directly insert it into the switch's contact terminals， and hear the "click" sound to lock it. The entire process takes only a few seconds， and the efficiency of mass wiring is extremely high. It is convenient to plug and unplug. For later maintenance or replacement of the switch， you can simply pull it out.
Based on the situations of the above three terminals， the protruding base quick-insert terminal push-button switch is the most convenient to install and the most cost-effective.